Sanitaire SC5845 Vacuum Cleaner Manual

The Sanitaire SC5845 is a powerful commercial vacuum cleaner designed for professional cleaning. It features a durable construction, a high-efficiency motor, and a range of attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency motor, durable construction, multiple attachments, large capacity dust bag.

Feature	Description
High-efficiency motor	Provides powerful suction for deep cleaning
Durable construction	Designed for commercial use with long-lasting materials
Multiple attachments	Includes crevice tool, dusting brush, and upholstery nozzle
Large capacity dust bag	Reduces the frequency of bag changes
Easy maneuverability	Lightweight design with swivel steering
HEPA filtration	Traps allergens and dust for cleaner air

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle: Align and secure the handle to the main body.
Install the dust bag: Open the dust compartment and insert the dust bag.
Connect attachments: Choose the appropriate attachment for your cleaning needs.
Plug into AC power: Ensure the vacuum is off before plugging in.

WARNING! Ensure all connections are secure before use.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Check power: Ensure the vacuum is plugged in and the power switch is on.
Adjust height settings: Set the brush height according to the floor type.
Test suction: Turn on the vacuum and check for proper suction.

CAUTION! Do not operate without a dust bag installed.

Specifications

Model: Sanitaire SC5845
Motor Power: 10 amps
Filtration: HEPA filter
Dust Capacity: 18 quarts
Weight: 8 lbs
Dimensions: 12 x 14 x 44 inches
Power Source: 120V AC
Operating Temperature: Standard room temperature.

Controls and Settings

Access controls on the handle: Power switch, height adjustment dial.

Attachments: Easily switch between attachments for different cleaning tasks.

Connecting Accessories

Ensure the vacuum is off before connecting any accessories.

Align the attachment with the connector.
Push firmly until it clicks into place.
Test the connection by gently pulling on the attachment.

Tip: Use the appropriate attachment for optimal cleaning results.

Operating the Vacuum

Follow these steps for effective operation:

Turn on the vacuum using the power switch.
Adjust the height setting based on the surface being cleaned.
Move the vacuum back and forth slowly for thorough cleaning.
Empty the dust bag when full for optimal performance.

WARNING! Do not block the suction inlet while operating.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean or replace the HEPA filter as needed.
Check for clogs in the hose and attachments.
Wipe down the exterior with a damp cloth.
Store in a dry place when not in use.

Regulatory Information

Meets safety standards for commercial use. For support, visit www.sanitaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord unplugged	Check power connection and plug in.
Poor suction	Clogged hose or full dust bag	Inspect hose for clogs; replace dust bag.
Strange noise	Foreign object in brush	Turn off and remove the object.
Overheating	Blocked airflow	Turn off and check for clogs.

Reset: Unplug for 10 seconds to reset.

Service: 1-800-555-0199; www.sanitaire.com